Biosan BioMagPure 12 Plus Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 22

Biosan BioMagPure 12 Plus Скачать руководство пользователя страница 16

Page 16

V1.6.3

5.

Cleaning and maintainance

5.1.

Two types of maintenance are performed on the BioMagPure 12 Plus system Instrument as

listed in the table. For details on each type of maintenance, see below:

Maintenance Type

Performed by

Schedule

Cleaning of Sample Tray

User

After each use

Cleaning of instrument body (outside)

Bi-weekly

Cleaning of instrument body (inside)

Preventive

Service Engineer

Annually

5.2.

Clean the Sample Tray with mild detergent and rinse with deionized water. Allow the parts to

dry before use. Clean and disinfect the platform surface by wiping with deionized water followed

by 75% ethanol.

5.3.

Clean the instrument body by removing dust gently with a dry, soft cloth. If the outside of the

BioMagPure 12 Plus system is heavily soiled, or if any samples that may cause infection are

adhered to the outside of the BioMagPure 12 Plus system, wipe with a soft paper tissue,

soaked with 0.5% sodium hypochlorite solution or ethanol.

«
...
14
15
16
17
18
...
»

Содержание BioMagPure 12 Plus























Отзывы:

Нет отзывов