BIOS Defender 500 Series, Руководство пользователя, Страница: 10 / 19

16 17
Note:
(010 in series) indicates the number of measurements. 10 is the
factory-preset number. Define the number of measurement you
prefer, from 1 to 100, by accessing the SETUP menu.
In Continuous or Burst mode, select:
• PAUSE to terminate the current flow measurement but
to leave the average flow measurement and previous flow
measurement on the screen. This allows you to resume
the flow measurement sequence if you wish to do so.
• RESET to terminate the flow measurement and clear
the screen.
3.0 Data Port
Interfacing with Optimizer
®
and CalCheck
®
Your Defender comes with a data port that provides a digital
Interface for use with Bios Optimizer Software or with the
SKC CalCheck
®
Interface. Visit www.biosint.com to find more
information about Optimizer software, and for access to
available Optimizer or Defender firmware upgrades.
3.1 Optimizer Software
Your Defender is supplied with Bios Optimizer Collect light. Bios
Optimizer Collect light captures flow data from your Defender
directly to a Microsoft Excel
®
pre-configured spreadsheet.
You can upgrade to Bios Optimizer Collect for more features
such as hot key commends, instrument library, have multiple
instruments interface simultaneously and much more.
To run Optimizer Collect (upgraded version) or Collect light
you must have Windows
® XP, Windows ® Vista (32 bit version),
Microsoft Excel
®
2000, 2003, 2007. See the Optimizer CD
cover for installation instructions.
3.0
2.0