BIOS BD215, Инструкция по эксплуатации

Страница: 21 / 40

Ó°{Ê1Ș}ÊÌ iÊ1- Ê*œÜiÀÊ`>«ÌiÀ
You may also operate this monitor using the included
USB adapter. Use only the included USB adapter to avoid
damaging the unit.
1. Ensure that the USB adapter and cable are not
damaged.
2. Plug the adapter cable into the USB / Adapter port on
the blood pressure monitor.
3. Plug the adapter into your electrical outlet. When
the USB adapter is connected, no battery current is
consumed.
3. Using the Device
This section describes how to get the maximum benefit from your BD215 blood pressure monitor. Follow the
instructions carefully to get an accurate measurement of your blood pressure and pulse rate.
3.1 Setting the Time and Date
When you insert the batteries or USB adapter for the first time the LCD screen will
show all the display elements for 2 seconds. Afterwards it will prompt you to set the
current date and time. You can also adjust the date and time at any time by pressing
and holding the
START
STOP
M
button for over 3 seconds. Follow these steps to set the date and
̈“iÊÃiÌ̈˜}Ã\
1. When you press the
START
STOP
M
button for over 3 seconds, the year will start flashing.
Press the
START
STOP
M
button to adjust the year and press the
START
STOP
M
button to confirm setting.
2. Next, the screen starts flashing the month setting. Press the
START
STOP
M
button repeatedly
to set the month and then press the
START
STOP
M
button to confirm the settings. Follow the
same steps to set the date setting.
3. Lastly, the screen starts flashing the hour format values, 12/24 hr. Press the
START
STOP
M
button to set the format and then press the
START
STOP
M
button to confirm the settings.
Follow the same steps to set the hour and minute values.
"/\
When no button is pressed for 1 minute the monitor will return to regular
mode and after 3 seconds turn off.
M
START
STOP
START M
STOP
PUL