2.4 Using the AC Adapter
You may also operate this monitor using the included AC
adapter (output 6V DC/600 mA with DIN plug). Use only the
included AC adapter to avoid damaging the unit.
1. Ensure that the AC adapter and cable are not damaged.
2. Plug the adapter cable into the AC adapter port on the
blood pressure monitor.
3. Plug the adapter into your electrical outlet. When the AC
adapter is connected, no battery current is consumed
Note:
No power is taken from the batteries while the AC
adapter is connected to the monitor. If electrical power is interrupted, (e.g., by accidental removal of
the AC adapter from the outlet) the monitor must be reset by removing the plug from the socket and
reinserting the AC adapter connection.
Note:
If using both batteries and adapter at the same time, make sure to unplug the adapter from the
monitor first to ensure the time and date do not reset. If you unplug the adapter from the outlet the time
and date will reset.
Functional check:
Hold the button down to test all the display elements. When functioning correctly
all segments must appear.
3. Using the Device
This section describes how to get the maximum benefit from your 3MS1-4Y blood pressure monitor.
Follow the instructions carefully to get an accurate measurement of your blood pressure and pulse rate.
3.1 Setting the Time and Date
When you insert the batteries for the first time (see “Inserting the batteries”), the monitor prompts you to
set the current date and time. You can also adjust the date and time by pressing and holding down the
button for over 3 seconds. Follow these steps to set the date and time settings:
1. When you press the button for over 3 seconds, the year will start flashing.
Press the button to adjust the year and press the button to confirm setting
2. Next, the screen starts flashing the month setting. Press the button repeatedly to
set the month and then press the button to confirm the settings. Follow the same
steps to set the date setting.
3. Lastly, the screen starts flashing the hour values. Press the button repeatedly to
set the hour and then press the button to confirm the settings. Follow the same
steps to set the minute values.
