PRECAUTION
- Before " " appearing, please don't touch your blood drop to the sample
entry on strip because meter is doing a internal test. If you do so, the
meter will show " " and " " and you will waste a strip.
35
34
PRECAUTION
- To ensure accurate test results, make sure the code number on your meter matches the
code highlighted on the vial of test strips you are using.
- If the code number does not match, change the Smart Code Key to the right one and redo
a test.
- If the meter turns off before you apply the blood sample, take out the unused test strip and
reinsert it. You have 2 minutes to apply the blood sample before the meter turns off
automatically.
- Please follow the local regulation and discard the
used strips properly.
5. While the " " symbol flashing, you are ready to apply the blood sample. The
code number will appear on the right up corner of the screen.
Performing a Test in Order
Performing a Test in Order
Obtaining blood sample
1. Hold the lancing device to the soft side of your fingertip and press the
release button to get a tiny blood sample.
PRECAUTION
Before you take the blood sample, please make sure your fingertip for
sampling is dry thoroughly. Water or alcohol might affect the accuracy
of testing.
2. Obtain a small blood drop on your finger
In order to get a more accurate measurement, suggest to discard the first
drop of blood. ( The first drop of blood from your fingertip might include
some body liquid which might affect the testing accuracy. )
3. You can start measurement by the second drop of blood.
