38
Understanding the LED Lights:
LED Light
State
Blue Flashing
Bluetooth trying to pair with the app.
Bluetooth connection lost during workout for a period
Blue Solid
Bluetooth connected
Purple Solid
Workout paused
Off (unit turns off)
Bluetooth did not connect with the app in time (80s)
Red Solid
Failed electrode check – check wiring and unit docked.
Check no plastic sheet is between electrode and stud.
Unit fault – switch off /let power down, charge unit and switch back on.
Red Flashing
Low Battery
Purple Flashing
Battery charging
Purple and Blue
Alternating Flashing
Battery charged
16. Ordering Replacement Electrodes
The gel will degrade with use. The
edges will fray and the surface will
become uneven and collect
skin/dust/hair, etc. They need to
be replaced when this affects your
workouts.
Typically, the skin
sensation may become sharper,
especially at the beginning of a
session. You can follow the in-App
links to purchase replacement
electrodes. Or you can find them at
the bionicgym.com webstore.
While waiting for replacement electrodes you can
wet
your legs with a little water in the
electrode areas. You can also
tighten
the wrap – this improves electrode contact with the
skin. You can increase the intensity more slowly allowing your skin nerves to get used to
the sensations more gradually.
17. Support
Email:
Contact Support if:
•
Your product is not working correctly. Do not use in the meantime.
•
You experience any major skin irritation, unexpected skin reaction,
hypersensitivity or other adverse reaction. You should, however, note
that some reddening of the skin may appear under the electrode pads
during and for a short time after a session
38
Understanding the LED Lights:
LED Light
State
Blue Flashing
Bluetooth trying to pair with the app.
Bluetooth connection lost during workout for a period
Blue Solid
Bluetooth connected
Purple Solid
Workout paused
Off (unit turns off)
Bluetooth did not connect with the app in time (80s)
Red Solid
Failed electrode check – check wiring and unit docked.
Check no plastic sheet is between electrode and stud.
Unit fault – switch off /let power down, charge unit and switch back on.
Red Flashing
Low Battery
Purple Flashing
Battery charging
Purple and Blue
Alternating Flashing
Battery charged
16.
Ordering Replacement Electrodes
The gel will degrade with use. The
edges will fray and the surface will
become uneven and collect
skin/dust/hair, etc. They need to
be replaced when this affects your
workouts. Typically, the skin
sensation may become sharper,
especially at the beginning of a
session. You can follow the in-App
links to purchase replacement
electrodes. Or you can find them at
the bionicgym.com webstore.
While waiting for replacement electrodes you can
wet
your legs with a little water in the
electrode areas. You can also
tighten
the wrap – this improves electrode contact with the
skin. You can increase the intensity more slowly allowing your skin nerves to get used to
between sessions.
the sensations more gradually . If you
sweat
a lot in a session let the electrodes dry out
17.
Support
Chat and Email:
visit
www.bionicgym.com
for Live Chat.
Contact Support if
your product is not working correctly. Do not use in the meantime.
38
Understanding the LED Lights:
LED Light
State
Blue Flashing
Bluetooth trying to pair with the app.
Bluetooth connection lost during workout for a period
Blue Solid
Bluetooth connected
Purple Solid
Workout paused
Off (unit turns off)
Bluetooth did not connect with the app in time (80s)
Red Solid
Failed electrode check – check wiring and unit docked.
Check no plastic sheet is between electrode and stud.
Unit fault – switch off /let power down, charge unit and switch back on.
Red Flashing
Low Battery
Purple Flashing
Battery charging
Purple and Blue
Alternating Flashing
Battery charged
16. Ordering Replacement Electrodes
The gel will degrade with use. The
edges will fray and the surface will
become uneven and collect
skin/dust/hair, etc. They need to
be replaced when this affects your
workouts.
Typically, the skin
sensation may become sharper,
especially at the beginning of a
session. You can follow the in-App
links to purchase replacement
electrodes. Or you can find them at
the bionicgym.com webstore.
While waiting for replacement electrodes you can
wet
your legs with a little water in the
electrode areas. You can also
tighten
the wrap – this improves electrode contact with the
skin. You can increase the intensity more slowly allowing your skin nerves to get used to
the sensations more gradually.
17. Support
Email:
Contact Support if:
•
Your product is not working correctly. Do not use in the meantime.
•
You experience any major skin irritation, unexpected skin reaction,
hypersensitivity or other adverse reaction. You should, however, note
that some reddening of the skin may appear under the electrode pads
during and for a short time after a session
39
18.
Care and Maintenance
Maintenance
BionicGym does not require any calibration or maintenance.
BionicGym device and its accessories should be kept in the BionicGym box and stored in
a dry place.
Replace your electrodes if the stimulation becomes less comfortable (typically this may be
after 20-25 sessions). When not in use
cover the exposed
gel surface with the plastic
sheets. (If you have sweated a lot allow the gel to dry before replacing the
plastic sheets).
Repair
BionicGym does not contain any User serviceable parts. Do not dismantle the Control Unit
or the charger
as they contain high voltage components which could cause electric
shocks.
Repairs must only be carried out by Medical Currents Ltd, approved technicians or
repair services. If your BionicGym contains parts that appear to be faulty,
please contact
Cleaning
The control unit can be cleaned with a soft dry cloth. Avoid using chemical p roducts and
keep the control unit dry. The garment can be cleaned with a damp sponge.
Disposal
The BionicGym control unit contains batteries that must be
disposed of in accordance with current national regulations.
The BionicGym control unit and charger contain electronics
that must be disposed of in accordance with current national
regulations.
The garment is constructed from neoprene with a PVC logo
patch, electrical cabling.
The left leg pocket contains an ABS+PC dock for the control
unit.
The hard plastics of the BionicGym are constructed from
ABS+PC.
38
39
If
you experience any medical issue we recommend stopping and contacting
your
doctor.
(Note
some mild
skin
redness
is
normal
with
electrical
stimulation).
