MetaBird-v1-03/15/20
Page
19
on
30
“Joystick” interface settings (“Classic RC” and
“One finger”):
Neutral steering path and Steering path
:
These settings
configure the path your finger needs to follow
(movement of the finger) to start triggering a turn, and
also to attain a maximum turn. They are set by default
at 6mm and 5mm.
Motor steering power:
In case of difficulty when turning
the bird, increase the power to help by accelerating the
change of direction. The default value is 50%.
Throttle path: Set the desired length of the path
(movement of the finger) to go from minimum to
maximum power (15mm by default).
Setting available for the Classic RC mode only: Right-
handed/Left-handed
This setting allows you to reverse the position of the
joysticks that control the throttle and the steering, to
allow the screen to reflect your dominant hand. You can
choose between right or left-handed display (or mode 1
and mode 2 for the RC enthusiasts).
Once your settings are finalised, click on the “Fly” button
to return to the flying screen.
Pressing the “RESET” but
ton on the bottom of each
setting screen allows you to restore the factory settings.
