MetaBird-v1-03/15/20
Page
14
on
30
By placing your index finger on the screen, you define
the zero position of the throttle/steering cursor.
Steering: Gliding your finger either left or right allows
you to control the steering.
Sensitivity can be altered in the advanced settings
screen.
Throttle: Gliding your finger up and down allows you to
control the throttle.
Sensitivity can be altered in the advanced settings
screen.
When CRUISE CONTROL is inactive, the cursor returns
to zero as soon as you lift your finger (it springs back)
and the bird begins to glide. Place your finger on the
screen again and slide it towards the top to set the
throttle to your desired level.
When CRUISE CONTROL is active, the cursor can be
released and the throttle level will remain at the speed
at which it’s set.
However, the steering always returns to
the centre position.
Attention:
In this scenario, there may be a lag when
stopping the bird so ensure the bird has adequate
space, free from risks.
Attention:
Not touching the screen for extended
periods can activate your smartphone’s standby screen
during the flight if the power saving controls haven’t
been changed.
