1
reAD AND SAVe
THeSe iMPorTANT
SAFeTY iNSTrUCTioNS
When using electrical appliances, basic safety
precautions should always be taken including the
following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the
instruction manual.
3. To protect against electrical shock do not immerse
unit, plug or cord in water or spray with liquids and
plug the appliance directly into the appropriate
electrical outlet.
4. Close supervision is necessary when any appliance
is used by or near children.
5. Unplug from outlet when not in use, when moving
fan from one location to another, before putting on
or taking off parts and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or
flammable fumes.
8. To avoid fire hazard, NEVER place the cord under
rugs or any parts near an open flame, cooking or
other heating appliance.
9. Do not operate any appliance with a damaged cord
or plug after the appliance malfunctions, or has
been dropped/damaged in any manner. Discard
fan or return to an authorized service facility for
examination and/or repair.
10. Do not run cord under carpeting. Do not cover cord
with throw rugs, runner, or similar coverings. Do not
route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be
tripped over.
11. The use of attachments not recommended or sold
by the appliance manufacturer may cause hazards.
12. Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or
leave exposed to high traffic areas.
13. Do not use outdoors.
14. To disconnect, grip plug and pull from wall outlet.
Never yank on cord.
15. Always use on a dry, level surface.
16. Do not operate fan until fully assembled with all
parts properly in place.
17. This product is intended for household use ONLY
and not for commercial or industrial applications.
18. WArNiNG: To reduce the risk of electrical shock
and injury to persons, do not use in window.
19. WArNiNG: To reduce the risk of fire or electric
shock, do not use this fan with any solid-state
speed control device.
20. (For 120V & 127V units with two flat pins only).
This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician. DO NOT MODIFY THE PLUG
IN ANY WAY.
DeSCriPTioN oF
THe APPliANCe
A. Logo Plate
B. Hanging Grill Clip
C. Front Grill
D. Fan Blade Cap
E. Fan Blade
F. Rear Grill Mounting Nut
G. Rear Grill
H. Motor Shaft
I. Motor Housing
J. Oscillation Control Plugs
K. Grill Clips (4)
L. Control Panel
M. Mounting Nut
N. Height Adjustment Collar
O. Extension Pole
P. Base
Q. Metal Bracket
R. L-Shaped Screw
eNGliSH
A
B
D
C
E
F
G
K
H
I
J
M
R
Q
L
N
P
O
Fig. 1
