Bioenno Power BPP-M400, Руководство пользователя

Страница: 14 / 16

12
Failure
Code
Failure Cause Troubleshooting
E01 System over-temperature protection
Check the ambient temperature if higher
than 45
℃
. Output will start again if PPS
cools down.
E02 Battery Over Voltage Protection Disconnect the charger and restart it
E03 Battery Damage Protection Contact the Customer Service Center
E04 1st Battery String Over-Voltage Disconnect the charger and restart it
E05 2nd Battery String Over-Voltage Disconnect the charger and restart it
E06 3rd Battery String Over-Voltage Disconnect the charger and restart it
E07 1st Battery String Low Voltage
Charge it in time and restart it after fully
it’s fully charged
E08 2nd Battery String Low Voltage
Charge it in time and restart it after fully
it’s fully charged
E09 3rd Battery String Low Voltage
Charge it in time and restart it after fully
it’s fully charged
E10
Low Temperature Discharging
Protection Charge if the ambient temperature is
lower than -20
℃
E11 Battery Low Voltage Protection
Charge it in time and restart it after fully
it’s fully charged
E12 Inverter Over Current Protection
Check if the AC output overload or short-
circuit
E13 Inverter Over Load Protection Check if the AC output overload
E14 Inverter Short-Circuit Protection
Check if the AC output overload or short-
circuit
E16 Charging Over Voltage Protection
Check if the input voltage excess the
maximum
E17 Low Temperature Charging Protection
Check if the ambient temperature is
lower than 0
℃