Biodom HANUMA 11 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 51

Biodom HANUMA 11 Скачать руководство пользователя страница 5

Biodom 27 d. o. o.

T: +386 8 205 10 86

[email protected]

OIC Hrpelje 4 a, 6240 Kozina

F: +386 5 662 67 57

www.biodom27.si

5

0.0

PURPOSE OF INSTRUCTIONS

The purpose of these instructions is to allow the user to adhere to all actions and prepare all of the materials
needed to safely and correctly use the furnace.

0.1

UPDATING

These instructions come into effect the moment the furnace hits the market. Consequently, Biodom 27 does
not consider furnaces that are already available on the market with suitable technical documentation and does
not consider them impeccable or adequate in terms of modifications, adaptations or new technology
implementation (on newer models).
The contents of these instructions are to be read carefully and all guidelines are to be followed accordingly. All
information contained within this booklet is extremely important for installation, usage and maintenance.
These instructions are to be stored carefully, as they contain key guidelines and procedures.

The instructions need to be provided upon re-selling the furnace to a third party.

If you lose this booklet, you may ask the manufacturer to provide you with a new one.

«
...
3
4
5
6
7
...
»

Содержание HANUMA 11




















































Отзывы:

Нет отзывов