Biodom 27 A, Инструкция по использованию, техническому обслуживанию и монтажу

Страница: 12 / 59

Biodom 27 A | instructions for use, maintenance and installation | March 2019
12
In case of a grid on the facade, draught opening must be 100 cm² or larger.
The device operates at 220 V – 50 Hz. Make sure that the electrical cables are not laid under the boiler,
that they are far away from hot surfaces and that they do not touch sharp parts, which could damage
them. If the pellet boiler is under electrical overload, life expectancy of electrical component greatly
reduces.
ATTENTION
Never turn off the boiler by pulling the electrical cable from the socket, while fire is still burning
in the boiler. This could damage the boiler and seriously jeopardize its functioning.
3.2. EXTRACTION OF SMOKE GASES
Extraction of smoke gases must be in accordance with regulations in force. Pipes for smoke gases must
not be connected to other discharge pipes of any other combustion device (
figure 2 ). It is prohibited
to set up extraction of smoke gases into closed and/or semi-closed spaces, e.g. garage, narrow passages
or hallways, underpasses or any other similar spaces. If the flue connection is not suitable, it must be
implemented in accordance with previously provided requirements (point 3.1).
Figure 2
ATTENTION
Extraction of smoke gases must be earthed in accordance with regulations in force. (Earthing
connection is required by law).
Earthing must be independent of combustion unit.
Regarding dimensions and material, from which it is made, the flue pipe must conform to standards
UNI 9615-9731, UNI 10683 - EN1856-1.