Biocomp GRADIENT STATION 153 Скачать руководство пользователя страница 4

May 22, 2013

GRADIENT STATION

BIOCOMP Model 153 

Gradient forming software Version 5.3 

Fractionation software Version 8.03

OPERATOR’S MANUAL

SECTION 1.  INTRODUCTION

1.1   WARRANTY AND SERVICE

BioComp has a policy of complete customer satisfaction.  If, during the first thirty (30) days, you are 
unhappy with the GRADIENT STATION, you may return it for a full refund.

BioComp warrants this instrument to be free of defects in workmanship for a period of one year from 
the date of  receipt for all electronic and mechanical parts. Liability is limited to repairs or replacement 
of the unit at BioComp's discretion. This warranty is in lieu of all other warranties either express or 
implied.

Claims against this warranty must be made by first contacting BioComp 

 (phone (506) 454-6410)

.  At 

this time the remedy will be determined.  Units returned to BioComp without our knowledge and 
permission will not be accepted.

Claims for shortages or damage in transit must be reported to BioComp within ten (10) working days of 
the date of receipt.  Such claims made after this period cannot be honored.

1.2   MAINTENANCE

Other than the tightening of loose screws and the removal of spilled gradient solutions, no user service 
is required.  The instrument contains a computer which should not be tampered with.  In the unlikely 
event of computer failure, contact BioComp and we will ship you a new printed circuit board and 
simple instructions for its installation.

1.3   ELECTRICAL SURGE PROTECTION

As with any computer, voltage spikes and power surges can severely damage the sensitive chips in this 
instrument.  You are strongly encouraged to purchase a surge protector from your local computer or 
hardware store and plug the instrument into it.  Since surges and spikes can occur at any time, it is also 
wise to turn the unit off when not in use to reduce your instrument's exposure to them. 

1.4   GOODS DAMAGED IN TRANSIT

If the instrument or any of the accessories are damaged when you receive them, it is critical that you 
save the shipping carton(s) and contact us immediately.  We will inform you of the return procedure 
and shipping addresses to put on the box.  If the box is damaged to such an extent that returning the 
instrument in it would risk further damage, 

save the box

 for inspection by the shipper who will be 

4

Содержание GRADIENT STATION 153
















Отзывы: