Find the Phillips screw driver and 2 of the 8-32 screws in the Accessory Pack. Attach the front panel to
the main unit by inserting its leading edge under the bent edge of the front panel and resting the two
flanges on the screw heads already installed on the side panels of the main unit as shown. Next screw
the computer to the bent edge of the front panel using 3 more 8-32 screws as shown:
!
5.6 Install the power plug.
You are now ready to power up the unit.
Find the external power supply (12VDC Powergate transformer) and insert its plug into the socket on
the right rear corner of the instrument. Non-Euro and North American users must supply the power
cord between the transformer and the wall socket. Be sure the switch above the plug on the back of
the unit is off (0) and plug the power cord into the wall receptacle.
!
13