16
17
3.3 Button functions
SET button:
1. When the scale is in sleep mode: Starts the
configuration mode both for setting the com-
mon as well as personal parameters, whereby
the first setting which can be set is the per-
sonal user no.
If nothing or the number “0” is selected here,
you get into the settings menu for the com-
mon parameters (valid for all users); if, how-
ever, a user no. other than “0” is selected,
you get into the settings menu for the per-
sonal parameters which are only valid for the
activated user no.
You can tell which parameter can be set at
any given time by its blinking.
2. When you press the SET button after se-
lecting a parameter value in one of the con-
figuration menus, this value is accepted and
you proceed to the next settable parameter.
UP/MEM button:
1. When the scale is in sleep mode:
Starts memory mode for displaying the stored
measurements of a user.
2. Selection or setting of a parameter or func-
tion. There are two activation options:
– Brief pressing, if necessary several con-
secutive times: Incrementing the parameter
value by one or switching to next param-
eter symbol.
– Keeping button pressed: Automatic incre-
menting of a value.
START button:
1. When the scale is in sleep mode:
Starts a measurement without and with input
of the user no. if the desired number isn’t
already displayed.
2. In the input menu: Selected value or pa-
rameter is accepted by pressing the UP/MEM
button and the scale switches to the next
menu item.
3. In the display menu: Switches to next
menu item.
4. By pressing the START button for a longer
time (at least two sec.): Exits the currently
active operating mode with transition into
sleep mode.
Note:
If no measurement is started or if no key
is pressed within one minute, the
scaleo-
comfort
diagnostic scale automatically goes
into sleep mode, where the current time is
displayed.
G
et
tin
g s
ta
rt
ed
3
