17
lifestyle Upgrade
Installation Manual and Operating Instructions
lifestyle Upgrade
16
Installation Manual and Operating Instructions
•
Before and after using Her Front Wash /
Her Back Wash / His Back Wash ,
the nozzle will automatically clean itself.
During a power outage, the water or seat heating temperature could appear to be lower than
the actual temperature setting.
•
When pressing the move function while using Her Front Wash/ Her Back Wash/ His Back Wash
the nozzle will automatically move back and forth covering a wider area for washing.
•
Press move button a second time to stop oscillation.
Other energy saving tips
In order to save energy, please abide by the following instructions:
•
Keep seat cover closed when not in use to prevent heat from being lost.
•
Keep temperature set to low.
•
Unplug the power cord if you do not plan to use it for a long period of time.
•
When pressing the Economy light on the
electronic toilet seat will turn on.
•
Economy mode automatically maintains a water and
seat temperature of 89.6
℉
.
•
If you want to turn off the Economy function,
press the button again and the display light will turn off.
•
The ( ) display lamp for the Water pressure / Dryer will change when using the dryer function.
•
Adjust the dryer temperature by pressing
(High),
(Low) .
•
The drying functions can be adjusted up to 5 levels.
•
When using the wash functions use
(Front),
(Rear) buttons to adjust the nozzle to fit to your body.
•
LED level
Front
I
Rear
Front
I
Rear
Nozzle position adjustment
Warm air dryer adjustment
Move
ECONOMY
Automatic self cleaning nozzle
•
Select a convenient spot near the toilet to attach the remote control holder.
•
Make sure that the selected spot will not be exposed to water and
the area where you intend to affix the holder is clean and dry.
•
Remove film from the double sided tape located on the back of the
remote control holder and place the holder in the selected area.
•
On remote control insert the two(2) batteries (1.5V AA) ensuring that the
poles on the batteries correspond to the directions on the remote control.
Setting up and using the remote control
•
LED level
High
I
Low
High
I
Low
(+, - please consider the right polarity)
Two (2) batteries
Double
sided
tape
Remote control
holder
•
As the warm air dryer temperature increases the LED light will illuminate (see above illustration)
•
Always purchase the correct size and grade of battery most suitable for the intended use.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Remove batteries from equipment which is not to be used for an extended period of time.
•
Remove batteries if consumed or if product is to be left unused for a long time.
9
Operation
(Instructions to operate each function)
OPERA
TION
