Biobase BK-HS32, Руководство пользователя

Страница: 9 / 29

8
1.2.2 Electricity safety
In order to use electricity safely and prevent electric shock and damage to the instrument, please
observe the following precautions.
Warning
：

This instrument is only suitable for non-domestic use and cannot
be directly connected to the residential low-voltage power supply
network.

If there are external switches or fuses or protection devices for over
current , these switches or circuit breakers should be installed near
the equipment.

Do not place the instrument where it is difficult to operate the
disconnection device. If the plug of the power supply cannot be
disconnected immediately in an emergency, make sure that the wall
socket connected to the instrument's power supply can be touched
by hand at all times.

After the installation is completed, customers are not allowed to
move the instrument without authorization. If the instrument must
be moved, please contact the installation engineer for on-site
service.

This system is connected to the ground via ground wire. The power
ground wire must be grounded to avoid electric shock.

The AC power supply must be stable. It is forbidden to share the
power supply with high-power appliances.

When the user runs or maintains the instrument, do not touch the
power connector on the back of the system, otherwise there may be
danger of electric shock.

When the main power of the instrument is turned on,
non-authorized maintenance personnel must not disassemble the
cover of the instrument.

Spilling the solution into the instrument may cause the instrument
to malfunction and cause electric shock. Do not place objects on
the instrument. In the event of a spill, immediately turn off the
power and contact Biobase Biodustry(Shandong) Co., Ltd.
Customer Service or your local service representative.

Do not plug or unplug the power supply with wet hands.

Disconnect it from all power sources before opening the instrument
for any maintenance or repair which should only be performed by a
person who is skilled and understands the hazards.

Make sure that the replaced power supply meets the requirements