Biobase BK-HS32, Руководство пользователя

Страница: 18 / 29

17
Figure 3-4
After clicking [Start], the program starts to run, [Step Remaining Time] is displayed as the remaining
running time of the current step, and [Total Remaining Time] is displayed as the overall remaining
running time of the program.
After the program starts running, the [Pause] and [Stop] keys will change from gray to clickable.
Click [Pause] to pause the program operation, and the [Pause] button to switch to [Continue], click
[Stop], the instrument stops the program operation and automatically resets.
Click [Return] to return to the upper interface.
Note:
1. Do not open the front safety door while the program is running or during the test. If the safety
door is opened, the operation will be immediately suspended until the safety door is closed and the
running program can continue.
2. When the program is not running, the [Pause] and [Stop] buttons are grayed out.
3. When the program is running, except for the [Pause] button and the [Stop] button, other buttons
are grayed out and cannot be operated until the program is finished.
4. When the running program is in the paused state, all buttons except the [Continue] and [Stop]
buttons are grayed out and cannot be operated.
3.2.3 Alarming
If abnormal operation or abnormal reset occurs during operation, the instrument will emit a short
alarm sound, and at the same time, the alarm information will be displayed after [AlarmInfo] in the
lower left corner of the main interface of operation, as shown in Figure 3-5.