23
Display doesn’t
work
Connection winding
displacement
Connection winding displacement
Display screen
Display screen
Control panel
Change it
NOTES
(1) The above trouble shooting methods should be done by qualified electricians under safe
conditions(cut off power supply). Other components should not be removed. Risk
caused by failing to follow those instructions would be responsible by user.
(2) Please contact Biobase technical department if a failure could not be traced or solved.
Do NOT repair the equipment without a qualified electrician.
(3) The trouble shooting and repair of this equipment only could be undertaken by trained
and recognized technicians.
(4) Please contact BIOBASE or our agent
technical department or agent to order
required component or part. The model number and the serial number of purchased
cabinet need to be indicated.
3.2 Replace the fuse
Fuse of waterproof socket is located at the right side of the cabinet. For replacing the fuse, turn off
the power and disconnect the plug. Use a flathead screwdriver to unscrew the fuse holder. Replace
the fuse inside the fuse holder and put it on back.
Picture 13
3.3 Replace fluorescent light
When the fluorescent light needs to be changed, turn off the power. Then remove the LED stand,
unplug the right side, After replacing a new LED stand, inserted into the inclined slot.
Take out the fuse tube
base with a flat
screwdriver. Then can
replace and check the
fuse.