BIO RAD iCycler, Быстрое руководство

Страница: 2 / 16

Life Science
Group
Website www.bio-rad.com U.S. (800) 4BIORAD Australia 02 9914 2800 Austria (01)-877 89 01 Belgium 09-385 55 11 Canada (905) 712-2771
China 86-10-62051850/51 Denmark 45 39 17 99 47 Finland 358 (0)9 804 2200 France 01 43 90 46 90 Germany 089 318 84-0
Hong Kong 852-2789-3300 India (91-11) 461-0103 Israel 03 951 4127 Italy 39-02-216091 Japan 03-5811-6270 Korea 82-2-3473-4460
Latin America 305-894-5950 Mexico 514-2210 The Netherlands 0318-540666 New Zealand 64-9-4152280 Norway 22-74-18-70 Russia 7 095 979 98 00
Singapore 65-2729877 Spain 34-91-661-7085 Sweden 46 (0)8-55 51 27 00 Switzerland 01-809 55 55 United Kingdom 0800-181134
00-000 0099 Sig 031799 Bulletin 0000 US/EG Rev A
Bio-Rad
Laboratories
To edit a stored protocol.
•
From the Home screen press F1 to display the protocol library.
• Use the arrow keys to highlight the desired protocol.
• Press Enter and from the selection box, choose Edit Protocol.
You may change any of the editable fields for the protocol.
• To add or delete a step or cycle, press F3.
• To choose increment or decrement of time or temperature, put the cursor
on the time or temperature field to be adjusted and press F4.
• To set the ramp time or ramp rate, place the cursor on the temperature to
which you are ramping and press F4.
• When you finish editing the protocol, press F5.
✔
Note that you may choose to run the edited protocol without saving the edits by choosing Run
Protocol from the selection box.
✔
Note that you may choose to save the edits prior to running the protocol. You may choose Save
Protocol or Save Protocol As... from the selection box. Once you’ve saved or named and saved the
protocol, you may choose Run Protocol from the selection box.
To create a new protocol.
•
From the Home screen press F2.
• Use the arrow key to highlight Custom in the selection box and press Enter.
• Edit the fields for your protocol.
•
To add or delete a step or cycle, press F3.
• To choose increment or decrement of time or temperature, put the cursor
on the time or temperature field to be adjusted and press F4.
• To set the ramp time or ramp rate, place the cursor on the temperature to
which you are ramping and press F4.
• When you finish editing the protocol, press F5.
✔
Note that you may choose to run the edited protocol without saving the edits by choosing Run
Protocol from the selection box.
✔
Note that you may choose to save the edits prior to running the protocol. You may choose Save
Protocol or Save Protocol As... from the selection box. Once you’ve saved or named and saved the
protocol, you may choose Run Protocol from the selection box.
4006172 Rev B