Installation
5
Install the Barcode Reader
The barcode reader attaches to the Lid Storage Platform. The Lid Storage Platform must
be installed and configured before installing the barcode reader. See the
Twister User's
Guide
for instructions on installing and configuring the Lid Storage Platform.
Tools:
Phillips head screwdriver
Step
Action
1
Locate the mounting bracket and the four #4 screws.
2
Align the four screw holes on the bottom of the barcode reader with the four
holes in the mounting bracket.
3
Using the four #4 screws, attach the barcode reader to the bracket as shown
below.
4
Using the two #8 screws, attach the mounting bracket to the Lid Storage
Platform as shown below.
5
One end of the barcode reader communications cable has a split cable for
plugging in the manual trigger (shown below). Insert the 9-pin plug on this
end into the back of the barcode reader.
