Bio-office TC500, Руководство пользователя

Страница: 57 / 126

FP Verify
ID 008101
Workcode 000000
Click the button [OK] to confirm. This function is only for the TC500/TC550/OC500.
Real-time monitor function: Realtime monitor function is only for the TCP\IP
communication method.
Ring function: Enable is function before using the Ring time settings. It is only for
TC500/TC550.
Update the fingerprint template intelligently: During fingerprint sensor identification
process, the senor replaces the lowest-quality data with new, higher-quality data that it
acquired in the matching process. This enables the sensor to maintain high quality data
at all times, saving the user from repeated authentication attempts. Default status is
limited.
Wiegand Mode: Wiegand26, Anviz wiegand.
Fixed wiegand area code (0~254): If you upload one fingerprint to two terminals,
the same fingerprint’s wiegand outputs are different in the different terminals. If the two
terminals’ wiegand area codes are same, the same fingerprint’s wiegand outputs are
same in these two terminals.
Lock Relay time (0~15seconds): The door open delay.
Click the button [OK] to save the settings. Following message box pops up:
Click the button [OK] to confirm or click the button [Cancel] to cancel.
The operation information in the main interface is as follows:
[2009-03-18 15:05:08]Set Advanced Parameter...
[2009-03-18 15:05:10]1[Head office]Parameter setting successfully!
Click the button [Display default setting] to see the terminal’s default settings
4.1.8 Ring settings
Set the ring time. Please enable the Ring function in the parameter settings first of
47