sessantaquattro user manual v1.1 - June 2017
pag. 8
6
TECHNICAL SPECIFICATIONS
Sessantaquattro is a battery powered device designed to guarantee an high safety level for the
patient and the operator in all operating conditions. The insulation between sessantaquattro and
the PC for real time data display and storage, is intrinsically achieved by the wireless data transfer
and communication. The same connector is used for electrode interface and battery recharge
avoiding the chance to supply the quattrocento from an external source when it is connected to
the patient.
The connector for the auxiliary inputs is intended for the interface with other floating devices
(goniometers, accelerometers or amplifiers for other biological signals). The connection must be
done in compliance with the European standard EN 60601-1-1 on medical devices.
Table 6.1 shows the list of available adapters and their connections.
Adapter
Available connections
CUSB01SE
USB type C, for battery recharge
AD8x1SE
Eigth four poles 3.5 mm jacks for connection of two bipolar electrode pairs (16
electrodes pairs in total). An additional four poles 3.5 mm jack for two auxiliary
signals. A 2 mm female banana for the patient reference connection.
AD1x16SE
A 16 pin connector for linear electrode arrays. An additional four poles 3.5 mm
jack for two auxiliary signals. A 2 mm female banana for the patient reference
connection.
AD2x32SE
Two 32 pin connectors for 32 electrode matrixes. An additional four poles 3.5
mm jack for two auxiliary signals. A 2 mm female banana for the patient
reference connection.
AD1x64SE
A 70 pin connectors for 64 electrode matrixes or 64 electrode EEG caps. An
additional four poles 3.5 mm jack for two auxiliary signals. A 2 mm female
banana for the patient reference connection.
TAB. 6.1: list of sessantaquattro available adapters.
Additional adapter can be realized under user request to interface other type of electrodes or
sensor.
