F. User Identification Mode Selection( 3. STA -> 3. MODE )
1. 1:1 mode : A user enter his/her ID(4 number) before input a fingerprint.
This mode identifies the fingerprint entered as his/her finger
print registered.
2. 1:N mode : A user doesn’t need to enter his/her ID before input fingerprint.
This mode checks that the fingerprint entered exists among
all fingerprint registered.
- submenu of 1:N mode -
1. ENT + FP : After push PWR button, push ENT key before
input fingerprint.
2. PWR + FP : After push PWR button, input fingerprint directly.
PWR
SET
3.STA
SET
Shutter Close
Power Off
1. 1:1
2. 1:N
3.MODE
2. PWR + FP
1. ENT + FP
G. The Number of Identification Chances Setting up
( 3. STA -> 4. CHANCE )
According to the identification mode selected in ‘3. MODE’ menu, set up the
number of entering User’s ID(1:1 mode) or inputting fingerprint(1:N mode).
‘1. SET’ give 3 times and ‘2 CANCEL’ give just 1 time.
PWR
SET
3.STA
SET
Shutter Close
Power Off
1. SET
2. CANCEL
4.CHANCE
- 14 -
