EN - 12
BAL.0093 • 2018-09-03
8 Maintenance and cleaning
TIG welding torch
The parts of the TIG welding torch listed below are subject to wear and soiling. This is why these
parts must be subjected to regular maintenance and cleaning:
• Torch body
• Gas nozzle
• Tungsten electrodes
• Back cap
• Electrode holder
DANGER
Risk of burns
The welding torches reach very high temperatures during welding.
• Allow the welding torches to cool down.
• Wear the correct protective gloves.
NOTICE
• The maintenance intervals given are recommended values and refer to single-shift
operation.
• Maintenance and cleaning work may only be carried out by qualified personnel (in
Germany see TRBS 1203).
• Check coolant hoses, seals, and connections for damage and tightness. Replace as
necessary.
• Always wear your personal protective clothing when performing maintenance and
cleaning work.
