15.17.1.1 Accept call waiting
Select
#
.
Confirm your selection with the OK key.
You are connected to "subscriber 2" whose call is waiting.
"Subscriber 1" is put on hold and hears hold music or a message.
Hold your conversation with "subscriber 2" whose call was waiting.
The following are displayed if possible:
The name and number of "subscriber 2",
the name and number of the external line,
the name of your own telephone
and information about call forwarding and forwarded calls.
You can terminate the call with "subscriber 2" by replacing the receiver. "Subscriber 1"
then rings using "Return call" and you can continue the conversation with "subscriber 1".
15.17.1.2 Reject call waiting
Select
.
Confirm your selection with the OK key.
The call is ended and the caller hears the engaged tone.
Continue the current conversation.
15.17.1.3 Forward a call waiting
Select
* %
with the Navigator.
Confirm your selection with the OK key.
Enter the number that you want to forward the caller to.
Confirm your entry with the OK key.
The caller who is waiting is rerouted to the connection selected.
Continue the current conversation.
15.17.1.4 Switch off the call waiting tone
Select
%(
with the Navigator.
Confirm your selection with the OK key.
The call waiting tone is switched off but the call is still there.
Continue the current conversation.
When you replace the receiver, the waiting call is signalled.
bintec elmeg GmbH
15 Dialling
System telephones elmeg S560 / elmeg S530
73
