Please see
Fig. 6
on page 9.
Fig. 6:
Unscrewing the screws from the front panel tray
(4)
Once unscrewed, pull out the tray from the front panel slot. Please see
Fig. 7
on page 9.
Fig. 7:
Extracting the tray from the front panel
(5)
If the card provided with the tray is fixed, go to the next step. If not, place the card in the correct position after
having extracted the tray. Once this has been done, attach the card using the appropriate screws (making sure
you don't damage it during the tightening process). Please see
Fig. 8
on page 9.
Fig. 8:
Placing the expansion card
(6)
Finally, insert the tray into the device once again using the appropriate guides. See
Fig. 9
on page 10.
bintec elmeg
3 Components and Power Supply
RM3000 Router
9
