The kit contains 2 screws to adjust the rail accessory on the underside of the device, as shown in the following figure:
Fig. 10:
DIN rail mount adapter
3.3 Power Source
The bintec 4Ge-LE is powered though an external AC/DC source or through an Ethernet cable (if it complies with
the POE 802.3af standard).
Warning
The equipment must be used with the power supply provided by the manufacturer.
Workplace Conditions. Main Characteristics
• Avoid humid and/or dusty locations.
• Direct exposure to sunlight, as well as to other heat sources, should be avoided. The device should not be placed
amongst papers, magazines or other elements that could hinder natural air circulation.
• The device should not be placed very close to strong electromagnetic fields such as speakers, engines, etc.
• Knocks and/or strong vibrations should be avoided during transport, operation and storage.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables following the steps set forth in
Connect
on page 12 and
Disconnect
on page 13.
3.3.1 External Power Source
To connect the power supply to the device, please follow the steps outlined in
If the Ethernet cable isn’t PoE
on page 12
.
To avoid electric shocks, residual current circulation and other unwanted effects, also affecting communications, the
following is recommended:
bintec elmeg
3 Components and Power Supply
bintec 4Ge-LE
11
