Binks Maple 7/15 10 40 41, Инструкция по эксплуатации, Страница: 13 / 16

Instruction Manual
Page 13 of 16 Issue: 1.5
Spares Kits for Maple 7/15 Pump
Kit No. Part No. Description Remarks
250653 Fluid Section Service Kit
Check Main Parts List
for details of individual
Kit Contents
250655 Fluid Section Overhaul Kit
250657 Air Motor Seal Kit
#
192765 Pilot Valve Assembly 2off per Pump
#
0115-010015 Main Spool & Sleeve Valve Assembly 1off per Pump
#
193195 Piston Seal 2off per Pump
#
192881 Knifed Bellows 2off per Pump
# - Recommended Spare Parts for continually running pumps
Maintenance Schedule
Inspection Operation
Daily Check for any general fluid or air leakage.
Weekly
Inspect Pump for Correct operation
Check for any excessive mechanical noise
Check for excessive fluid pressure pulsation
6 Monthly Test
Perform a pump stall test to ensure correct operation.
•
If pump does not stall check fluid piston seals and ball
checks, replace as required.
•
If air is escaping through exhaust check air motor piston seal
and quick exhaust diaphragm, replace as required.
12 to 36 Months
(Typically 10 million
Pump Cycles
dependant on air
quality and
abrasiveness of the
paint used)
Replace Air Piston seal
Replace shaft seals & bearings
Inspect and replace if required:-
Pilot Air Valves
Main Air Valve Parts
Replace Fluid Piston Seal
Replace Balls and Seats
Replace Bellows