Binks HP 4/32 Скачать руководство пользователя страница 8

Страница: 8 / 47

Edition 06/08

Packings:

The lifetime and the maintenance rate of a pump depend crucially on the right packing. The pack-

ing for solvent and waterbased paint are different.

For the use of high viscosity or high corrosion materials we recommend high-strength packing.

Depending on the field of application there are different packings for solvent and waterbased mate-

rials.

Standard packing:

Upper packing:

Mixed standard packing (for solvent paint materials)

Part-no.: 0114-014513

Consisting of: PTFE/Leather packing

Standard packing (for waterborne paint materials)

Part-no.: 0114-014559

Consisting of: PTFE packing

Lower packing:

Mixed standard packing (for solvent paint materials)

Part-no.: 0114-014512

Consisting of: PTFE/Leather packing

Standard packing (for waterborne paint materials)

Part-no.: 0114-014558

Consisting of: PTFE packing

Packings for high-strength and corrosion materials:

Upper packing:

Mixed high-strength packing (for solvent paint materials) Part-no.: 0114-016272

Consisting of: PTFE(high-strength)/Leather packing

High-strength packing (for waterborne paint materials)

Part-no.: 0114-016262

Consisting of: PTFE(high-strength) packing

Lower packing:

Mixed high-strength packing (for solvent paint materials) Part-no.: 0114-016273

Consisting of: PTFE(high-strength)/Leather packing

High-strength packing (for waterborne paint materials)

Part-no.: 0114-016263

Consisting of: PTFE(high-strength) packing

Note:

To the high-strength packings graphite is added to the PTFE. This improves the lubrication quali-

ties. High strength packings are not recommended for bright finish paint. Graphite can change the

colour of the finish paint.

If you need special packings without graphite admixture please contact your dealer.

Our pumps are supplied fitted with mixed packing for the application of solvent paint.

Содержание HP 4/32
















































Результаты поиска

Содержание HP 4/32

Отзывы:

Похожие инструкции для HP 4/32

Бренды по названию

Популярные бренды

Binks HP 4/32, Руководство по эксплуатации

Результаты поиска

Содержание HP 4/32

Отзывы:

Похожие инструкции для HP 4/32

Бренды по названию

Популярные бренды