Binks GEMS, Руководство по техническому обслуживанию и ремонту

Страница: 14 / 38

14/38 77-2985-R0.5
EN
Reassembly Lubricant Callouts
Refer to the icons below to avoid damage and aid assembly of mating parts. Different lubricants are
called out depending on the function of the part and lubricant. These triangles are placed next to the
corresponding part number label on assembly views.
Gun Lubricant
Use DeVilbiss SSL-10 gun lube to lubricate O-rings and sliding parts for assembly.
SSL-10 is silicone and petroleum-free and is easily washed away by typical paint solvents.
Petroleum Gel
Use Petroleum Gel to lubricate threads or other part surfaces to prevent galling or
other damage upon reassembly.
Thread Sealant
P.T.F.E tape or liquid pipe thread sealant is required on pipe threads to lubricate
and prevent leaks. If using tape, wrap 2-3 times clockwise around the male threads. If
using liquid, add a bead of sealant around entire 2nd male thread before tightening into
female thread. Do not loosen sealed parts.
Follow all assembly procedures and lubricant
recommendations to ensure proper operation.
NOTE