Binks 41-818836, Руководство по эксплуатации и обслуживанию

Страница: 3 / 22

B41-818836conductiveacetal-rev0416 Model 41-818836 Conductive Acetal Ball Valve Pump Page 1
General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance. Should not be used with highly polar solvents like
acetone and MEK, ozone, chlorinated hydrocarbons and nitro hyrdrocarbons.
Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE- molten alkali metals, turbulent liquid or
gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures.
High tensile material with excellent abrasion resistance. A general purpose material with excellent resistance to most oils.
Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion resistance.
Model 41-818836
Model 41-818836-B
Conductive Acetal
Ball Valve Pump
Air Operated
Double-Diaphragm Pump
ENGINEERING, PERFORMANCE
& CONSTRUCTION DATA
MATERIALS
Maximum* Minimum*
Operating Temperatures
CAPACITY
0 to 14 gallons per minute
(0 to 52 liters per minute)
AIR VALVE
No-lube, no-stall
design
SOLIDS-HANDLING
Up to .125 in. (3mm)
HEADS UP TO
100 psi or 231 ft. of water
(7 Kg/cm
2
or 70 meters)
DISPLACEMENT/STROKE
.026 Gallon / .098 liter
CAUTION! Operating temperature limitations are as follows:
190° F
88° C
-10° F
-23° C
BINKS
®
pumps are designed to be powered only by compressed air.
190° F
88° C
-20° F
-29° C
220° F
104° C
-35° F
-37° C
180° F
82° C
-35° F
-37° C
275° F
135° C
-40° F
-40° C
II 2GD T5
II 2 G c T5
II 2 D c T100°c
CAUTION: Nonmetallic pumps and plastic components are not UV stabilized. Ultraviolet radiation can damage these parts and negatively affect material
properties. Do not expose to UV light for extended periods of time.
Maximum and Minimum Temperatures are the limits for which these
materials can be operated. Temperatures coupled with pressure affect the
longevity of diaphragm pump components. Maximum life should not be
expected at the extreme limits of the temperature ranges.
Warranty Information
5-YEAR Limited Product Warranty
Binks ® manufacturing warrants to the original end-use purchaser that no product sold by Binks shall fail under normal use and service
due to a defect in material or workmanship within five years from the date of shipment from Binks factory.
See complete warranty at
www.binks.com
INTAKE/DISCHARGE PIPE SIZE
Model 41-818836 - 1/2" or 1" NPT(Internal)
Model 41-818836-B - 1/2" or 1" BSP (Tapered)