Bindicator Roto-Bin-Dicator, Руководство по установке и эксплуатации

Страница: 12 / 16

8
www.bindicator.com
LAR180212 Rev. E
VI. MAINTENANCE
PREVENTATIVE MAINTENANCE
No scheduled preventative maintenance is required for the Roto-Bin-Dicator
®
units when properly applied and
installed correctly. There is no cleaning required for the unit before or during installation.
If the cover is removed after the unit has been in service, it is recommended to replace the gasket to prevent the
ingress of water or dust. At a minimum, the gasket (or o-ring, used in hazardous locations) should be inspected
for folds, cracks and tears.
RECOMMENDED SPARE PARTS
MOUNTING PLATES
Includes H-20 Mounting Gasket
PART NUMBER MODEL DESCRIPTION
LAR110130 H-19 Mild Steel (Side of Bin)
LAR110140 H-19SS 304 Stainless Steel (Side of Bin)
LAR110180 H-192 Mild Steel (Top of Bin)
LAR110190 H-192SS 304 Stainless Steel (To
p of Bin)
SHAFT COUPLINGS
PART NUMBER MODEL DESCRIPTION
LAR110270 H-36 Neoprene 3 in. Flexible Shaft; 170º F (77º C) Max Temp
LAR120640 H-38 Stainless Steel, 3 in.
LAR110275 H-36S Molded Silicone 3 in. Flexible Shaft; 400º F (204º C) Max Temp
PADDLES
All are stainless steel except model H-373.
PART NUMBER MODEL DESCRIPTION
LAR110310 H-370 4-Vane; 1
1
/2”x 5” Diameter with Pins
LAR110360 H-371 4-Vane; 2” x 7” Diameter with Pins
LAR110430 H-373 Multiflex; Solid Neoprene 1
1
/2” x 24” with Pins
LAR110450 H-374 Multiflex; Stainless Steel 1
1
/2” x 17” with Pins
LAR111037 H-379 1-Vane; Insertable with Pins
LAR111040 H-372A 1-Vane; 1” x 2
7
/8” with 45º Cut
LAR111200 H-380 2-Vane Collapsible, Stainless Steel
note. Consult the manufacturing facility on applications where the housing ambient temperature is above 200º F (93º C).
WARNING: IN ORDER TO MAINTAIN SAFE OPERATION IN HAZARDOUS LOCATIONS, THE
INTEGRITY OF THE ALUMINUM CASTING AND THE EPDM SEALS MUST BE MAINTAINED. THE
USER/INSTALLER MUST AVOID INSTALLATIONS WHERE AGGRESSIVE SUBSTANCES MAY BE
PRESENT AND COULD AFFECT THE PERFORMANCE OF THESE MATERIALS. CARE MUST BE
EXCERCISED WHEN REMOVING AND REPLACING THE COVER, SO NO MARRING, SCRATCHING
OR DAMAGE OCCURS TO THE FLANGES.
CAUTION: IF THE UNIT WAS SUPPLIED WITH A GASKET, AVOID FOLDING, CUTTING OR TEARING
THE GASKET. DAMAGING THE GASKET CAN ALLOW MOISTURE TO ENTER THE ENCLOSURE AND
DAMAGER THE UNIT
StockCheck.com