Bindicator Roto-Bin-Dicator, Руководство по установке и эксплуатации

Страница: 11 / 16

7
www.bindicator.com
LAR180212 Rev. E
• Appropriately marked as the disconnect for the device and associated circuit
• Sized appropriately to the requirements of the protected circuit (See specifications)
PROTECTIVE EARTH GROUND
To eliminate shock hazards in the unlikely event of an internal insulation breakdown, the unit is provided with
a “protective earth” (
) lead which must be connected to earth ground. In addition, the input power ground
lead must be connected to the “protective earth” ( ) terminal provided. Wire sizes must be selected such that
it can safely carry the sum total of all circuits’ maximum amperage.
WIRING
1. Connect the power source for the motor to the terminal block. Continuous power is essential. The motor
may be stalled indefinitely without damage.
2. Make wiring connections to the control micro switch using a separate circuit from that of the motor.
3. Apply power to the motor circuit, checking the freeness of operation and actuation of the micro switch.
4. Fasten the housing cover securely to prevent damage from dust or moisture.
WIRING FOR SINGLE SWITCH WIRING FOR DOUBLE SWITCH
24/120/240 VAC UNITS
warning: Do not power motor through a microswitch.
WIRING FOR 24 VDC UNITS
StockCheck.com