TWG 01 01/2011
page 22/39
Step Key
Effect
Yellow
LED
1.
Program call
1x flashing
2.
Program selection: “Entry of a phone
number to be dialed“
1x flashing
3.
e.g.
Selection of the of the phone number
saving location (1 to 6)
1x flashing
4.
Selection of program step confirmed
2x flashing
5.
Entry of phone
number
Information entry: Phone number
of the selected location
1x flashing
following each hit
6.
(several
times, if
appropriate)
Entry of break before hanging up
(each hit equals 3,6 sec)
1x flashing
following each hit
7.
Programming terminated
lights up for 1.5 sec
6.4.4 Entry of a pager message
You can enter a number that shall be transmitted to and displayed on a pager. Additionally a break
should be programmed between dialing the phone number and sending the number message.
Step Key
Effect
Yellow
LED
1.
Program call
1x flashing
2.
Program selection: “Entry of a phone
number to be dialed“
1x flashing
3.
e.g.
Selection of the of the phone number
saving location (1 to 6)
1x flashing
4.
Selection of program step confirmed
2x flashing
5.
Entry of phone
number
Information entry: Phone number
of the selected location
1x flashing
following each hit
6.
(several
times, if
appropriate)
Entry of break before sending the
message (each hit equals 3,6 sec)
1x flashing
following each hit
7.
Start of entry
1x flashing
8.
Entry of number to
be displayed
Information entry: number to be
displayed on the pager
1x flashing
following each hit
9.
End of entry
1x flashing
10.
Programming terminated
lights up for 1.5 sec