Binder COMBIMASS compact, Сборка и руководство по эксплуатации

Страница: 49 / 53

COMBIMASS
®
compact
Doc. No.: 0905AE20500
49
Kapitel 3 Appendix
The analog output:
Menu: Analog-Out
Purpose: Configuration of the analog output (4..20 mA).
Starting from the normal operation display, press the SET-button followed by pressing the
⇓
-button three times to get to the analog output menu.
Display:
FS-20mA
Functions:
With the full-scale (20mA)
FS-20mA
you can change the value that the device shows with a complete
deflection on the analog output. The value is specified in Nm³/h. It can be reduced to max. 10 % of the
final calibration value.
With the damping function
DAMPING
the integrating time of the device can be changed. The device
uses the average of the measured values out of the time period set in the damping function. Range: 0.0
sec. to 600 sec.
The navigation and manipulation of the values in this menu works like already explained for the other me-
nus (for example 'The summation').
The correction menu:
Menu:
CORRECTION
Purpose: Managing the correction values
Starting from the normal operation display, press the SET-button followed by pressing the
⇓
-button four times to get to the correction menu.
Display:
CORRECTION
Functions:
The
Corr.-Fakt.
is a multiplier which multiplies the measured value. It can correct the indicated mea-
sured value, for example as a result of changes in the device or established deviations of the measured
value (gas compositions, flow profile etc.)
The
T2-Faktor
is generally set by the manufacturer and shouldn't be changed!