Binder APT.line C 150, Руководство по эксплуатации

Страница: 34 / 79

C 150 (E2) 06/2011 page 34/78
Display Setting range Operating function
Firmware revision of safety controller
for service / maintenance pur-
poses.
Data record (year)
for service / maintenance purposes.
Data record (month)
for service / maintenance purposes.
Data record (day)
for service / maintenance purposes.
Data set version
for service / maintenance purposes.
OFF, or -199,9 °C
to +300 °C
Temperature adjustment
serves to adjust the temperature sensor.
OFF, or
-10.0 vol.-% to
110.0 vol.-%
CO
2
final value adjustment
serves to adjust the CO
2
sensor.
The operating function “
At.S
” specifies the safety controller set point type “Limit” (Lit) or “Off-
set” (OFS).
•
With set point type “Limit” (Lit), operating function “
AL.S
” (safety controller set point as limit
value) is displayed in operating modes HAND and USER. You can set a limit value .
•
With set point type “Offset” (OFS), operating function “
Ot.S
” (safety controller set point as
offset value) is displayed in operating modes HAND and USER. You can set an offset
value.