37
Move the Handset
closer
to the Base unit.
Check the
Battery Level
symbol on the display. If it is
low, replace the handset on the base unit or charger pod
to recharge the batteries.
Switch off power at the mains socket, wait for a few
seconds and then switch back on. This may solve the
problem.
If you still can’t make calls, try
re-registering
the
Handset.
“When I press keys
Make sure the
battery pack
on the Handset,
nothing happens.”
recharge the batteries.
Press and hold the
OK
button until the handset comes
to life. The
OK
button switches the handset on and off.
Check whether there’s a ‘
Lock
’ symbol on the display. If
so, the keypad is
locked
. Turn to Section 3 and find out
how to unlock it.
Troubleshooting continue...
Try moving the Handset
closer
to the Base unit.
Try a
different position
for the base unit - perhaps
higher, or further from other electrical equipment.
Check that the Base unit’s
mains power
adapter is
plugged in and power is switched on. The Base unit
needs mains power for normal operation of the phone -
not just for charging the batteries.
Make sure you’re using the
telephone line cable
that
was supplied with your
cables might not work.
Check that you have not set the
ringer volume
to Off.
See Section 4 for more information.
Check that the
total REN value
of all equipment
connected to your telephone line is no more than 4.
Disconnect one or more telephones and see whether
that helps.
“When I press keys on
Handset, digits appear
on the LCD screen, but
I can’t make an outside
call.”
“The phone does not
ring.”
Veva1210. Other telephone line
is fitted in your handset. If
the Battery Level symbol on the display shows ‘low’,
