2. Plug the telephone line cord and the mains
power lead into the rear of the Base unit.
Press the cables into the grooves so that
the Base unit stands level.
3. Plug the mains adapter into a
230 V AC, 50 Hz mains socket,
with the switch on the socket
set to OFF.
4. Switch on the mains power at the socket.
5. If you have an
Twin, Triple or Quad system.
Plug the mains adapter into a 230 V AC, 50 Hz mains socket, with the switch
on the socket set to OFF. Then switch on at the socket.
Always use the telephone line cord RJ11C
supplied with your
telephone line cords may not work.
The Veva1210 Base unit must be used with the
supplied mains adapter. Using any other adapter
will result to noncompliance with EN60950, and
will invalidate any approval given to this apparatus.
1. Locating the Base unit
The Base unit should be placed on a level surface, in a position where:
the mains adapter plug will reach an easily accessible 230-V AC
switch mains supply socket -
never try to lengthen the mains power cable
.
the
telephone line cable
will reach your telephone line socket or extension
socket.
it is
not close to a sink, bath or shower
, or anywhere else where it might
get wet.
it is
not close to other electrical equipment
- fridges, washing machines,
microwave ovens, TVs, fluorescent lights, etc.
5
3. Installation
Veva1210. Other
Veva1210
P
