“The Caller
Display feature
isn’t working.”
You need to subscribe
to the Caller Display feature
from BT or your network service provider. You should
find contact details on your phone bill.
The caller may have
withheld
their number by dialling
141. Or they may be calling from a network that does
not transmit the caller’s number (for example, it may be
an international call).
“When I try to
make a call, I
hear Busy tone.”
If you’re using a Symphony 2610 multi-handset system,
check that another handset isn’t already busy on a call.
“The volume in
the earpiece is
low when I’m
on a call.”
Make sure you’re holding the earpiece correctly over
your ear.
Adjust the volume using the
or
button.
Intercom and transfer
“I can’t transfer
a call.”
Make sure the other handset is in range of the base unit.
Make sure you’re dialling the correct number for the
other handset (
The answering machine
“The machine
won’t record
messages.”
Make sure the answering machine is
switched on
.
The machine’s memory may be full.
Delete some
messages
to make room for new ones.
Check which
outgoing message (OGM)
is selected;
and that this OGM is not set as ‘announcement only’.
Troubleshooting
If you have a network answer machine service set with
your line provider(
1571
service) and you wish your tele-
-phone to answer your calls then you must disable the
network answer service; Or set the answer machine
rings to five or less.
Binatone Help Line:
0845 345 9677
(Local Call rate)
59
1 to 6 ).
