Time and date
If you subscribe to Caller Display (see page 22) your
Symphony
from the network when you receive an incoming call.
Once you’ve installed your Symphony
batteries and connected the base unit to the telephone
line,
ask someone to make a call to you
.
you can set the time and date yourself, as follows:
1
Press the left Soft button to select
Menu
2
Press the
or
button to scroll to
3
Press the left Soft button to confirm
4
Press the
or
button to scroll to
Date / Time
then press
u
The display shows
current date format
Key in the date as a eight-digit number then
select to confirm the date changed
OK
Key in the time as a four-digit number (24-
hour) then select
OK
*
Press the right soft button
Back
twice to go
back to idle mode
* If the time format is 12-hour, you are request to define the
Clock/Alarm
menu
Select
Select
Date Format
Time Format
Set Date
Set Time
Press the
or
button to scroll to
then press
Select
5
Set Date
u
The display shows
6
:
DD MM
:
MM DD
Date Format
You can select on steps 4 to switch
the date format between and .
Press the
or
button to scroll to
Select
7
8
or by press Up and Down button.
AM
PM
You can select on steps 4 to switch
the time format between and .
Time Format
12 Hour 24 Hour
9
on steps 4 then press
Set time
Binatone Help Line:
0845 345 9677
(Local Call rate)
13
2610 should take the time and date settings
2610, charged the