Binatone NHM-7706, Инструкция по эксплуатации

Страница: 6 / 28

6
OPERATING INSTRUCTIONS
1. Select the attachments you intend to use.
2. Before fixing the attachments, check that the
speed selector
(2) is in position «0» and the
power cord (8) is disconnected from the supply
outlet.
3. Attachment
(5), can be fixed in random or-
der. Fix them into apertures for attachments (7)
till a click is heard.
4. Before switching the appliance on, make sure that both at-
tachments are fixed properly!
5. Connect the appliance to the power outlet and set the speed
selector (2) to the desired setting to start operation of the
machine. Always start operating the machine at the lowest
speed gradually increasing the speed.
6. At the end of the operation set the speed selector (2) to «0»
position and switch the unit off the power supply.
7. Remove excessive products from attachments by a plastic or
wooden scapula.
8. Push the button of automatic ejection of attachments (3) to
take them out of the housing (1) .
CARE AND CLEANING
1. Always disconnect the unit from the power
outlet before cleaning.
2. Rub the housing
(1) and the power cord (8)
of the machine with damp cloth and then rub it
dry.
3. Wash the attachments
(5,6) in warm water
with detergent and dry them. Attachments may
be washed in a dishwashing machine.
Note: never immerse the appliance’s housing (1) and the
power cord (8) into water.
USEFUL ADVICES
X
To achieve homogeneous substance move the
whisks inside the bowl along its perimeter. If it is
necessary to clean the bowl in which you prepare
food from remnants of non-mixed products stop
the appliance and remove remnants of products
from the walls of the bowl with a scoop. After that
continue operating the mixer according to the se-
lected regime.
X
It is recommended to use beating whisks (5) to prepare pud-
dings, puree, mobile dough (for example, pancake dough),
to beat cream and egg whites (fro example, to prepare kiss.
Selection of the speed regime: