Customising your handset
General points
You can customise the settings of your Lifestyle 100
handset, using a menu which is shown on the handset’s
display. Please note that:
■
If you don’t press any button for about 25 seconds,
the handset will
time out
and the display will return
to standby mode.
■
When you confirm any setting you have made, you’ll
hear a
confirmation tone
. If you make a mistake,
you’ll hear a
warning tone
.
■
At the end of each set of steps
, you can return the
handset to standby mode by either:
—
replacing the handset on the base unit
—
pressing and holding the
HANG UP/C
button
Auto-answer
When a call comes in, you need to press any button to
answer it. Or you can set auto-answer — so, if the
handset is in place on the base unit, you simply lift it to
answer the call, without pressing any button.
1
Press the
PROG
button then
1 5
2
Use the
or
button to set:
0
for auto-answer
off
1
for auto-answer
on
3
Press the
PHONE/OK
button to confirm
24
Ringer volume
and melody
The handset has eight ringer volume levels, including
0
for off; and eight ringer melodies. With the volume set
to 0, the handset will not ring for an incoming call, but
the display will show
call
or the phone number.
To change the
volume
:
1
Press the
PROG
button then
1 1 1
2
Use the
or
button to change the
volume
3
Press the
PHONE/OK
button to confirm
To change the
melody
:
1
Press the
PROG
button then
1 1 2
2
Use the
or
button to change the
melody
3
Press the
PHONE/OK
button to confirm
Key tone
Normally, whenever you press a button on the handset,
you hear a ‘beep’ tone. You can turn these tones off if
you prefer.
1
Press the
PROG
button then
1 1 3
2
Use the
or
buttons to set:
0
for key tone
off
1
for key tone
on
3
Press the
PHONE/OK
button to confirm
Customising your handset
Binatone Help Line:
0845 345 9677
(Local Call rate)
25
E:\Binatone2004\Lifestyle\Lifestyle_100\Lifestyle-100_UK_01.vp
14 April 2004 15:14:07
Color profile: Generic CMYK printer profile
Composite Default screen
