44
Registering new handsets
The handset(s) supplied with your iDECT V2 base unit
are already registered to it, so you don’t need to register
them. But if you’ve bought extra handsets separately,
you’ll need to register them. Up to four handsets can be
registered to an iDECT V2 base unit.
To register a
new handset
Make sure the handset you’re registering is in
standby mode.
1
M
Press the
MENU/OK
button
!
Display shows
Main Menu
>
Phonebook
2
d
Press the
D
button THREE times
!
Display shows
Main Menu
>
Advanced Set
3
M
d
Press the
MENU/OK
button and the
D
button
TWICE
!
Display shows
Advanced Set
>
Registration
4
M
Press the
MENU/OK
button
!
The display shows
Enter PIN
The PIN is 0000 unless you’ve set a new one
(see page 33)
5
M
Key in the PIN and press the
MENU/OK
button
!
The display shows
Registering...
6
V
Immediately press the
HANDSET LOCATOR
button on the base unit and hold it until you hear
a repeated beep tone
!
If the base is found and the PIN is correct you
will hear a long confirmation beep. The handset
display will show the available handset numbers,
but if you don't select one, it is automatically
given the lowest free handset number.
iDect_V2_IFU_master.book Page 44 Friday, April 4, 2008 4:05 PM