35
9.5.8.1 Screening at the base
By default, answering machine calls are played automatically through
the base speaker and the volume can be adjusted with the
and Volume - keys on the base. If you don't want the caller to be heard
when leaving a message, the base screening can be turned off, as
follows:
1. Press [Menu] and <UP/DOWN> to select
Answer Machine
.
2. Press [Select] and <UP/DOWN> to select
TAM Settings
.
3. Press [Select] and <UP/DOWN> to select
Remote Access
.
4. Press [Select] and <UP/DOWN> to select
On
or
Off
.
5. Press [Select] to confirm the setting.
9.5.8.2 Screening with a handset
If the answering machine is set to ON, when there is an incoming message,
the handset will display “
Screen?
”
1.
Press [ OK ] to start call screening. Any handset can listen.
2.
The handset will display “
Screening
”.
3.
You can adjust the speaker volume by pressing <UP or DOWN>, or
listen via the earpiece by pressing <SPEAKERPHONE>.
OR
4. Press [ Back ] to stop the screening and return to the previous display,
"
Screen?
".
At any time if you want to pick up the call, you can press [ PickUp] or
<TALK> and the message recording will be stopped automatically. If the
answering machine is in the process of recording, the message already
stored will be saved.
9.5.8 Call Screening
When the answering machine is on and takes a call, you can listen to the
caller leaving a message, from the handset or the base, and then decide
whether to take the call in person.
