Binatone HCR-220 Trio, Инструкция по эксплуатации

Страница: 6 / 30

6 66 66
BEFORE USE
! Wipe the case of the appliance and
the working surface with slightly damp
soft cloth.
!
Only use the appliance for styling
dry hair. To achieve the optimum ef-
fect use hair styling products.
! Read the information in the following table and choose
the most appropriate heating mode for you.
!
To make sure that you have chosen a proper mode,
check the operation of the appliance on a small lock of
your hair.
!
During the first use you may notice a small stream of
smoke or smell. It is normal and disappears very quickly.
DIRECTIONS FOR USE
Due to triple surface of the irons,
the time spent on the hair-do decreases
three times as compared to traditional
ways of curling.
1. Set the appliance on the support (5) (5)
(5) (5)
(5)
on a dry, even horizontal surface.
2. Connect it to the electricity supply
network and set the switch (7) (7) (7) (7) (7) to the desired mode.
The light indicator (6) (6) (6) (6) (6) will light up, showing that the
irons are heating.
Note : remember that at a high temperature the irons
will be very hot. Avoid contact of the skin with the hot
surface of the appliance, be very careful during use
.
3. Wait till the irons heat up to the required temperature
(approximately 3 minutes).
4. Separate a small lock (25-30 mm wide) and comb it
from the roots to the ends of hair. To avoid a skin burn,
place a plastic comb at the roots of the lock. For the
best result you should start curling from the hair roots
and gradually move the appliance closer to the hair
ends.
5. Press the lever (3) (3) (3) (3) (3) to raise the clip for hair (2). (2). (2). (2). (2).
6. Place the lock between the work surface (1) (1) (1) (1) (1) and the
clip (2) (2) (2) (2) (2) and carefully release the lever (3) (3) (3) (3) (3) .
7. Keep the irons on each section of the lock for 10-30