Binatone BM- 2068, Руководство пользователя

Страница: 7 / 52

9
ENGLISH
time of the second kneading, RISE2, RISE3 – time of the sec-
ond and third fermentation respectively, BAKE – time of bak-
ing bread).
4. Start the programme by pressing the START/STOP button.
Memory function in case of power
interruption
In case of power interruption while baking bread, the memory
function will ensure the storage of the selected programme within
10 minutes. Thus, after the power supply is restored, the appli-
ance will continue its operation according to the programme set
earlier. If power interruption lasts more than 10 minutes, you will
need to set the programme again. If operation was stopped at the
stage of kneading, you can simply press the
START/STOP button
and start the programme again.
Warning signs on the display
If after the programme was started by pressing the START/
STOP, the control panel (3) indicates “H HH” , it means that
temperature inside the appliance is too high. In this case you need
to press the
START/STOP button and switch the appliance off.
Open the cover and let the appliance cool down for 10-20 min-
utes.
If the control panel (3) indicates “E E0” or “E E1”, it means
that the temperature sensor is faulty. You must unplug the
breadmaker and take it to the nearest authorized service facility
for diagnostic operation.
CARE AND MAINTENENCE
1. Before cleaning the appliance, make sure
that it is switched off and unplugged from the
power supply.
2. Carefully wipe the exterior surface of the
appliance with a damp cloth. Do not use abra-
sive sponges and abrasive detergents, because
they can scratch smooth surface of the appli-
ance. Never immerse the body of the appliance and the cable
in water or other liquids.
3. Wash the inside of the bread pan (5) using non-abrasive de-
tergents. Dry it.
4. Wash the kneading blade (6) in tap water with abrasive deter-
gents and wipe it dry with a soft cloth.
Note: if the kneading blade (6) doesn’t come off the bar, fill
the bread pan (5) with warm water (up to 50° C)
and leave it for 30 minutes. Then remove the
kneading blade, wash it and wipe it with a soft cloth.
5. Before putting the appliance away for storage, make sure that
it is completely cool, clean and dry and that the cover is closed.