Customising your base unit
General points
You can customise the settings of your Big Button 510
base unit, using a menu which is shown on the
handset’s display. Please note that:
■
If you don’t press any button for about 25 seconds,
the handset will
time out
and the display will return
to standby mode.
■
When you confirm any setting you have made, you’ll
hear a
confirmation tone
. If you make a mistake,
you’ll hear a
warning tone
.
■
At the end of each set of steps
, you can return the
handset to standby mode by either:
—
replacing the handset on the base unit
—
pressing and holding the
HANG UP/C
button
Emergency
numbers
These two numbers can be dialled even when call
barring is set (see page 28).
1
Press the
PROG
button then
2 2 3 1
2
Key in the first emergency number
3
Press the
PHONE/OK
button to confirm
4
Press
2 3 2
5
Key in the second emergency number
6
Press the
PHONE/OK
button to confirm
Binatone Help Line:
0845 345 9677
(Local Call rate)
27
E:\Binatone2005\BigButton510\BigButton510_01.vp
27 February 2005 16:59:13
Color profile: Generic CMYK printer profile
Composite Default screen
