Binary B-660-MTRX-4X4, Руководство по установке

Страница: 22 / 28

22
3. CEC Control
Note:
• The following commands require that the display is CEC-enabled.
• Auto CEC within the matrix is disabled by default, enable if auto CEC power is
required.
Display On: Click to power On a connected CEC-enabled display.
Display Off: Click to power Off a connected the CEC-enabled display.
Auto CEC Slider:
Auto: Select to have the matrix send a power On command to the connected display when
the output senses a video signal and send a power Off command once the output senses a
loss of video signal. Power on commands are sent within 10secs of detection of signal and
delay time for power Off can be set from 1~30mins by changing the values in the Delay
Time selector box.
Manual: Select when manual control of the display will be handled through an outside
method such as an IR, RS-232, or IP control system. When manual is selected automatic
sensing to send power commands to the display is disabled. Note that there might be a
5~10sec delay for the display to respond when sending the commands manually.
Delay Time (1~30min): Use the up/down arrows to select a delay time from 1~30mins for
powering off the display after loss of video signal is detected. Note that this setting has no
function when the slider is set to Manual.