6
5. INSTALLATION
CAUTION:
Do not connect power to the device until all other connections are
made and the unit is installed.
5.1. B-540-RX-330-IR Receiver Installation
1. Run Category cable from the location of the transmitter to the remote
location of the receiver.
2. Mount receiver in the desired location.
3. Connect the Category cable to the receiver’s HDBaseT RJ45 port.
4.
Connect an IR flasher and/or IR receiver if being used. Refer to Section 6.2.
5. Connect an HDMI cable from HDMI Out of receiver to the display.
6. Connect the 12V DC, 2A power supply to the thread-locking power jack.
Do
not
plug the power supply into an AC outlet until transmitter installation is
completed.
6. APPLICATIONS
HDTV
PLAY
OFF
IR RCVR PWR
ON
12V DC
INPUT
HDBaseT
1
ON
HDMI IN
IR
Receiver
IR
Flasher
12V DC
INPUT
OFF
12V DC
HDMI OUT
IR
Receiver
IR
Flasher
FIGURE 2 : Application Diagram
HDMI Source
AC
Power
AC
Power
Back
Front
B-540-RX-330-IR Receiver
B-540-TX-330-IR Transmitter
